How to install waterproof breathable membrane?

Oct 16, 2023

Leave a message

After many sensor manufacturers have applied for ES series waterproof and breathable membrane samples, they still don't know how to install the sensor waterproof and breathable membrane. In fact, we have three common installation methods: welding, adhesive, and pressure. The welding type generally refers to ultrasonic, hot melt or high frequency, etc. The adhesive type generally refers to the waterproof glue and is directly pasted. The pressing type generally refers to the physical pressing method, that is, two objects are directly pressed together. Currently, adhesive and press-fit methods are generally used in the field of sensors.
In any case, the installation method of the sensor waterproof and breathable membrane is also a very important link, which is related to the protective performance. Choosing a good installation method of the sensor waterproof and breathable membrane can extend the service life of the waterproof and breathable membrane and also extend the service life of the sensor. Sensors integrated with the ES series waterproof and breathable membrane now include liquid level sensors, air pressure sensors, temperature sensors, electrochemical sensors, etc.
As we all know, sensor protection is receiving more and more attention. Since sensors are precision components, they cannot be contaminated by water, dust and other pollutants to prevent inaccurate data. Therefore, good protection is required. Currently, many domestic sensors will choose ES series waterproof and breathable membranes for waterproof and dustproof protection. The protection level reaches IP67/IP68, and it can be soaked in 1 meter of water for more than 30 minutes without any problem!